Simulation settings

Loads complete configuration, replaces current inputs.

Choose a sweep and set the incident conditions.

Wavelength (μm)
min
max
points
Simulation conditions
Material library
Available in your stack
Options
Uses the last layer as a semi-infinite backing. Its thickness is ignored, the rear surface is excluded, and external transmission is zero. Remove any rear coating when modeling an opaque wafer.
Averages the optical response over incidence angles. Available for wavelength sweeps; the single incidence-angle input is not used.
Coherent retains interference in all layers. Incoherent (mixed layers) automatically treats layers 10 μm or thicker incoherently, averaging their fringes, while thin coatings stay coherent. This does not make a layer opaque.
P polarization has its electric field parallel to the plane of incidence; S is perpendicular. Unpolarized averages the P and S responses.

Layer stack

Edit material and thickness directly in each layer. Colors identify materials; heights are not to scale.
Air Incident medium ↓
Air Exit medium

Optical Property Models

Enter valid wavelength bounds to filter models. Compatible models cover the full requested range; angle sweeps use the fixed wavelength. Show all models to inspect other ranges. Built-in models with unknown limits remain available.

Silicon simulation settings appear when silicon is selected.

Configuration Summary

Plots

Configure your stack and run a simulation.